Square Tube Rock Sliders for a 2017 GX460

On this 2017 GX460 build I made a set of square tube rock sliders, a rear bash bar bumper with a dual swingout (fuel carrier and tire carrier) and then a front insert bumper. This video covers the 2x2" square tube rock sliders.

General info on materials and dimensions...
The info is in the video but I use 3/16" 2 x 2 inch steel square tube for everything except the frame plates, those are 3/16" steel.
I generally use 0.030 solid wire with a MIG setup while welding.
For 3/16" steel I have the welder set up at about 290-300 for the wire speed and 20volts.
When I switched over to welding the sliders to the frame I dialed the welder down to about 245 wire speed and 18.5 volts.

My Amazon storefront where you can find a lot of items I refer to in the videos is at
https://www.amazon.com/shop/stevenben...

I make a few $$ a month from people clicking through and purchasing products mentioned here and I totally appreciate that. Clicking those links doesn't cost you anything extra. Feel free to reach out if you have any questions on the products I use.

I make these builds for people from all over the country, I'm constantly amazed at how far people come to have me work on their trucks. If you have any questions about how to do these builds yourself or if you're interested in having me work on your vehicle reach out, the info is in the intro video at the beginning and end of each video. You can also reach me at bentleycoaching@mac.com or 872-252-3685

Thanks for watching the video and have a great day.