How to Replace Rear Sway Bar Links 09-14 Nissan Murano

Buy Now!
New Sway Bar Link Set from 1AAuto.com https://www.1aauto.com/*/i/1asfk02469...

In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 09, 10, 11, 12, 13, 14 Nissan Murano

This repair was done on a 2010 Nissan Murano S 3.5L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2009 Nissan Murano
2010 Nissan Murano
2011 Nissan Murano
2012 Nissan Murano
2013 Nissan Murano
2014 Nissan Murano

🔧 List of tools used:
• 14mm Wrench
• 15mm Wrench
• 16mm Wrench
• 15mm Socket
• 16mm Socket
• 21mm Socket
• Channel-Lock Pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions

Subscribe:    / @1aauto  

Check out our playlist:
Nissan Murano 2009-2014 2nd Generation:    • Nissan Murano 2009-2014 2nd Generation  

For More Info visit us at https://1aau.to/h-a3S

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.