How to remove the battery on a Triumph Bobber quickly and easily!

I show you how to remove the battery on your Triumph Bobber 2023 and then replace the battery.

To remove the battery on a Triumph Bobber first remove the battery cover by loosening the bracket that is held on with a screw.
1. Remove the battery case 0:02
You will need a 5mm Allen key and then remove the lower strap. Then pull the cover away from the battery.

2. Remove the battery strap 0:23
To remove the strap pull down on the clip and release it from the lip on the battery housing

3. Disconnect the negative connection 0:33
Disconnect the positive (red) connection first.Then disconnect the negative (black) lead from the engine ground connection

4. Disconnect the positive connection 0:47
Either use the method I shown or you can also pull the battery out slightly which will give you the clearance above to allow for a screwdriver to fit and undo the screw holding the positive connection in place. (Something I found out recently and had to update as it is much easier)

5. Pull the battery out 1:23
Lift up the battery slightly so that it lifts over the lip on the housing and then pull the battery out of from the motorcycle

To replace the battery in the Triumph Bobber do the above steps in reverse.

6. Return battery strap on the back wall 1:49
Place the clip onto the back wall of the battery housing and push the battery back into the bike.

7. Reattach the positive and negative terminals 2:09

8. Replace battery cover 2:19

Hope this video helped you to take out the battery on the bobber. If you found it useful like the video, drop me comment below and subscribe it really helps my channel and makes these videos worthwhile.

Thanks for watching, stay safe and happy riding