Laminate Sample #10: Open Molded E-glass / Epoxy Plate
Автор: Explore Composites
Загружено: 2020-02-05
Просмотров: 14416
Laminate Sample #10 in the Explore Composites! Materials Library:
Also check out Laminate Sample #17 for a thinner version of this same process: • Laminate Sample #17: Thin Open-Molded E-Gl...
This panel is a hand laid / "open molded" epoxy and e-glass plate. The face plies are 6oz / 200g loose woven e-glass and the three middle plies are 12oz / 400g biaxial 'glass. Ply weights and orientation form a quasi-isotropic laminate balanced about the middle ply. The resin is Totalboat Fast 5:1 epoxy - very similar to WEST System.
The only method of consolidation here is the wet-out roller / bubble popper and lots of careful rolling. There's air in there but not so much that it isn't a representative example of what you might get if you built something this way. Peel ply helps keep resin from draining out of the lay-up and it gives a nice finished surface for the non-mold side.
See the rest of the information on this laminate sample at:
https://explorecomposites.com/materia...
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
