OBS 7.3L E-Fuel conversion

This is not a step to step guide but will give you the general knowledge on how to do it. It’s very straight forward and very easy to do. Watching videos before doing a job always gives me the confidence to be able to do the job. Hopefully this helps someone.

Forgot to mention in the video. But if you buy a OEM mechanical fuel pump from Ford it will be a Fleetrite aftermarket pump. From the reviews I read. They SUCK and it cost right at $400.00 from the dealership.

*Get a 1 1/4 Husky wrench from Home Depot. The slight bend on the box end is perfect for the banjo bolt.*

Parts needed and links to purchase everything. Rough estimate total: $600.00

2 x 3/16 Angle iron. $36.00
Qty: 2 pcs cut 18inch long
https://www.homedepot.com/pep/Everbil...

1/4 x 8 x 18 Aluminum OR Steel plate.
Qty: 1

1 x 2 x 4 Aluminum Block Spacers $19.00
Qty: 2
https://a.co/d/dd7vQf5

OEM Bosch 69909 $150
https://backwoodsdiesel.com/products/...

Mechanical fuel pump delete block $50
https://backwoodsdiesel.com/products/...

E-fuel wiring harness made by I-Rate $65
https://swagperformanceparts.com/idp-...

Banjo Bolt Gaskets (27mmx35mmx1mm) $5
Qty: 2
https://a.co/d/hjeYElu

M10x1.0 Male Metric to 3/8" Barb for Bosch Pump $9
Qty: 1
https://a.co/d/hyz0VMl

Bosch pump holder (50MM) $6
https://a.co/d/6DlE0Zo

Wix 24770 Fuel Filter Base $25
Qty: 2
https://a.co/d/d6btTXI

Wix Fuel / Water separator filters $30
https://a.co/d/ev4KHbN

3/8 Fuel Hose (10-20ft) $38
https://a.co/d/0SB2ChZ

3/8 Hose Barbs to 1/2IN male NPT $13
Qty: 4
https://a.co/d/6Q25tuC

Elbow 1/2" NPT Male x 1/2" NPT Female
$18.00
Qty: 2
https://a.co/d/5LeFSv4

1/2” Female x Male NPT Shut-Off Valves $20.00
Qty: 2
https://a.co/d/fqcAW46

Regulator $32
https://a.co/d/3B0pz0q

6AN Male Flare to 3/8“ Hose Barb Straight Fitting $9
Qty: 1
https://a.co/d/6jvG0LH

6AN Female to 6AN Female 90 Degree $12
Qty: 1
https://a.co/d/freJO4A

4AN Female to 4AN Male Flare Swivel
$12/each
Qty: 2
https://a.co/d/56july0

4AN Flare to 8AN ORB Male fuel rail $12
Qty: 3
https://a.co/d/gOV0PEY

3/8 x 5/16 Barb reducer splice connector
$5.00 / each
Qty: 2
https://www.oreillyauto.com/detail/c/...

YELLOW (Gas rated) Teflon tape
https://www.homedepot.com/pep/Oatey-1...

Hardware required.
1/4 Drill and 3/8 Drill bit
Clamps (To hold stuff down while drilling)
2 | 1/4-20 x 1.5” Bolt (Top Angle Iron)
2 | 3/8-16 x 1.5” Bolts (Bottom Angle Iron)
4 | 3/8-16 x 1.5” Bolts (Mount Plate)
4 | 1/4-20 x 2.5” Bolts (Filter Base Mounted)
2 | 1/4-20 x 1” Bolt (Bosch pump mounted)
1 | 1/4-20 x 1” Bolt (Relay bolted to frame)
2 | 8-32 Nuts (Bosch electrical)
2 | 10-32 Nuts (Bosch electrical)
2 | 5/16-18 Nuts (Battery terminal)
10 | Hose/fuel injector clamp for 3/8 hose
2 | Hose / fuel injector clamp for 5/16 hose