How to Replace Spark Plug 2007-2013 Acura MDX

Buy Now!
New Spark Plug Set from 1AAuto.com https://trq.video/ic-1AETK00077

This video shows you how to install spark plugs on your 2007-2013 Acura MDX. Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.

This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• 10mm Socket https://trq.video/oaIs-1AXAA00017
• 5/8 Inch Spark Plug Socket
• Torque Wrench https://trq.video/oaiB-1AXAA00044
• Dielectric Grease

Subscribe:    / @trq  

Check out our playlist:
Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.