Installing Reverse Camera and Explanation – Honda Accord 2003-2007

My #1 Recommendation To Making Income Online For Beginners 👇
CLICK HERE ➡️➡️➡️ https://100kjourneysuccesswithshu.com

In this video I will be showing you how to wire and install a reverse camera. Save yourself some money the job is quite easy to do even a rookie that has no experience with cars and wiring can do it. In each section I will go how to remove your car storage to access the wires behind the aftermarket stereo. Next, I will show you how to test your camera to verify that it actually powers on and that it works. Then show you how to connect the wires to your stereo. The next step will be showing you how to wire them to your reverse lights on the back of the car. The final step is to test the camera works when the car is set in reverse.

Removing car storage – 0:00

Verifying the camera works – 6:59

Connecting wires to the stereo – 9:20

Connecting wires to the reverse lights – 10:34

Testing the reverse camera – 12:27

Verifying camera works?
You connect the yellow aux and red aux together and from the power cable. You will put that into the positive battery terminal side and then plug your end of your other yellow aux into your car stereo aux and it should power on.

How to wire the wires to the stereo?
You connect the yellow aux into the reverse video aux on your stereo. Then for the small tiny red wire with this yellow aux wire. You will have three options to make this connection work. You first strip the wires of the reverse wire of your stereo and the mini red wire next to the yellow aux. You can solder, electrical tape or crimp them. I crimped mine and no issues so far.

How to wire the wires to the reverse lights?
You connect the yellow aux to the yellow aux and then strip the mini red wire and the red wire of the power wires. Your next step is you can twist the mini red wire and the red cable together and connect it to the green reverse wire on your reverse lights. For the black wire you will strip the wires and connect that one to your black reverse light wire. Or in this option you can do four things. Solder, electrical tape, crimp or just push them into the slot of the green and black wires. Be careful not to touch them with anything metal such as a screw driver or you can cause a short.

Any other questions feel free to ask me. I will get back to you in 24-48 hours. Contacting me on Facebook is the fastest way of contacting me.

DISCLAIMER! I DO NOT TAKE RESPONSIBLE FOR ANY DAMAGES YOU DO TO YOUR VEHICLE. YOU AGREE TO DO THIS AT YOUR OWN RISK.

----------------------------------------------------------------------------------------------------------------------------------------------------------------
Disclaimer:
There are affiliate links on this video, meaning, at no additional cost to you, I will be compensated if you click through and take action. Being compensated helps me run my YouTube channel and helps create more content for you.