Arccaptain's 200P TIG AC/DC welder Great Value

I put this welder to work, only using this machine for the last month in our fabrication shop and I was pleasantly surprised with it's performance.
In short I found this welder to be a solid machine. I was able to do every thing with the 200P that my more expensive machine normally does.
This would be a good beginner's machine, as well suitable for use in a maintenance setting and job shop.

If you're interested in this machine, you can use the coupon code LASR for 5% off
Link for this welder
https://www.arccaptain.com/?ref=3zw9opg9

(This welder is not available in Australia yet)

Technical Parameters from Arccaptain's website.
Power voltage
AC110V±15%
AC220V±15%

Input frequency
Hz
50

Rated input current
A
33@TIG 35@MMA

Capacity of power supply
KVA
6.0@TIG 7.5@MMA

Output current range (TIG)
A
10~120(110 v)
10~200 (220v)

Output current range (MMA)
A
10~110(110v)
10~160(220v)

Arc force range
A
0~40

Hot start current range
A
0~80

No-load voltage
V
60

Rated working voltage
V
18@TIG 26.4@MMA

AC output frequency
Hz
20~250

AC balance
%
20~60

Background level
A
10~200

Pulse frequency
Hz
0.5~200 (DC)
0.5~25(AC)

Pulse duty factor
%
5~95

Pre-flow time
S
0~5

Post-flow time
S
0~15

Rising time
S
0~15

Fall time
S
0~15

Remote control
Yes

Arc start mode
HF arc starter
Efficiency (%) 80

Duty cycle (%)
TIG: 200@25% -
MMA: 160@25%

Power factor
0.70

Type of cooling
Air cooled

Working temperature range
°C
—10~+40

Storage temperature range
°C
—25~+55

Protection class
IP21S

Insulation class
B