How to set up Pi-Hole on Ubiquiti Edge Router *HARD-WIRED ETHERNET EDITION* Beginner's Guide

00:00​ - Intro
00:26​ - Supplies List
00:49​ - Step 1: Reformat microSD
01:44​ - Step 2: Install Pi OS Imager
02:49​ - Step 3: Eject and remove microSD card
03:10​ - Step 4: Enable UART
03:41​ - Step 5: Enable SSH
04:08​ - Step 6: Safely eject microSD card
04:19​ - Step 7: Boot up the Pi
05:00​ - Step 8: Install Bonjour Print Services (Windows users only)
05:30​ - Step 9: Find the Pi's IP address
06:33​ - Step 10: SSH into Raspberry Pi
07:31​ - Step 11: Log in using the default credentials
07:42​ - Step 12: Change 'raspberry pi' hostname
08:22​ - Step 13: Change hostname in hosts file
09:04​ - Step 14: Reboot the Pi using SSH
09:29​ - Step 15: SSH back in
10:00​ - Step 16: Change the default password
10:27​ - Step 17: Install Pi-Hole
11:16​ - Step 18: Configure Pi-Hole
12:34​ - Step 19: Visit your Pi-Hole Web Admin interface
13:18​ - Step 20: Back up EdgeRouter's config settings
13:41​ - Step 21: Change nameservers
13:53​ - Step 22: Change DNS
14:21​ - Step 23: Reboot the router


SD Memory Card Formatter: https://www.sdcard.org/downloads/form...
Raspberry Pi OS Imager: https://www.raspberrypi.org/software/
Bonjour: https://support.apple.com/kb/dl999
PuTTY: https://www.putty.org/