SMCU 4 Axes Integrated Drive Input And Relay Testing

This is a video of me testing the limit/home switch inputs, and dual relays for the SMCU 4 axes integrated drive system for a client.

All components used in this video are listed below.

If you have questions, or require quotes please message me direct at [email protected] or through my eBay store here. https://www.ebay.com/str/edealersdirect

Below is a link to my soldering components that support the issues covered in this video.

Kester #44 Rosin Solder & Kester 186 RMA Flux, Heat Shrink 3mm,6mm,1/2in Pro Kit https://www.ebay.com/itm/142817628786

Kester #44 Single Tube Solder & Kester 186 RMA Flux & Heat Shrink 3mm,6mm,1/2in https://www.ebay.com/itm/132990261815

Kester #44 Rosin Solder & Kester 186 RMA Flux, De-soldering Braid & Heat shrink https://www.ebay.com/itm/143060430007

Here's the link to the Yihua 995D+ Soldering Station Package https://www.ebay.com/itm/133213693952

Here’s the link to the Yihua 908+ Soldering Iron Package https://www.ebay.com/itm/144027196930

Here’s the link to the Yihua 200C Automatic Tip Cleaner https://www.ebay.com/itm/144909497727

CNC components are listed below.

Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H https://www.ebay.com/itm/132210265015

CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap https://www.ebay.com/itm/143107363730

CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
https://www.ebay.com/itm/143685077396

Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
https://www.ebay.com/itm/133652809249

Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
https://www.ebay.com/itm/133652811447

Here's a link to my Ethernet Smooth Stepper turnkey package https://www.ebay.com/itm/133064380079

Here's a link to my UC-400 Ethernet Turnkey Controller package https://www.ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
https://www.ebay.com/itm/133300288430

CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
https://www.ebay.com/itm/143498883290

CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
https://www.ebay.com/itm/144280353346

CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
https://www.ebay.com/itm/144279518155

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) https://www.ebay.com/itm/143650166809

CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter https://www.ebay.com/itm/134192466153

CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
https://www.ebay.com/itm/134194961658

Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) https://www.ebay.com/itm/132532331429

This is my DS Flexion (Ultra Flex) cable.

CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891676093

CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw https://www.ebay.com/itm/133891673596

CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
https://www.ebay.com/itm/132649829362

This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)

CNC VFD Cable 10ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/142538105021

CNC VFD Cable 15ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273996534

CNC VFD Cable 20ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/131899174942

CNC VFD Cable 30ft 16/4 Double Shielded For Spindles https://www.ebay.com/itm/133273998565


Here's my 22/2 double shielded accessory cable.

CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
https://www.ebay.com/itm/145089695270

CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
https://www.ebay.com/itm/145089698308

CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
https://www.ebay.com/itm/145089706227


Here's links to the GX-16 prewired connectors discussed in the video.

CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters https://www.ebay.com/itm/144276695477


#Mach3Tools #CNCMachining #CNCSoftware #MetalworkingTech #CNCOptimization #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #Massocnc #mach3 #mach4 #OnefinityCNC #Pwncnc #redlinecnc #DIYcnc #Mach3 #Mach4 #MassCNC #CentroidCNC #CNC #DIY #CNCBuild #CNCSetup #CNCInstall #SpindleConnector #DoubleShieldedCable #CNCWiring #CNCForBeginners #CNCParts #CNCCommunity #CNCprojects #CNCProgramming #DIYMachines #CNCmachine #CNCvideo #CNCtechnology #ElectronicsForCNC #Mach3CNC #CNCwire #CNCtutorial"