DIY DRSSTC Music Tesla coil with Interrupter using cheap Driver Module

This project is sponsored by PCBWAY https://www.pcbway.com/?from=MirkoP
Participate in the PCBWay project design contest: https://www.pcbway.com/activity/7th-p...
The purpose of this project was primarily to test this inexpensive driver board, and this was also my first DRSSTC Tesla Coil with a half-bridge configuration. As you could see, the module works quite solidly and stably and meets the needs for simple making of such a Tesla Transformer.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.

Dertailed instructionsand schematics at:
https://www.hackster.io/mircemk/diy-d...

Chapters:
0:06 Short Demo
1:46 Description
5:11 Gate driver trafos Testing
12:00 Simple Test
12:26 In Real Conditions
14:10 Thermal Analysis
14:54 Music Tesla Coil
15:55 Demonstration
18 Conclusion
18:41 Building

A playlist of videos on this topic at:
   • DIY Lakhovsky MWO (Milti Wave Oscollator) ...  

If you like my job buy me a coffee: https://ko-fi.com/mircemk

Visit my Youtube Channel for more Projects , DIY and How To Make videos:
   / mirkopavleskimk  

by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !

#teslacoil #drsstc #highvoltage #pcbway