How To | 2020 + | Hyundai Sonata | Battery Replacement |

https://www.buymeacoffee.com/Automoti...

Instagram @Automotive_Dysfunction

Support Us On PATREON: https://bit.ly/3qQsO07

Support Us On PAYPAL: https://bit.ly/3r4DPdJ​​​​​​​​​​

Tools Needed:

New car battery
Wrench or socket set
Battery terminal cleaner or wire brush
Anti-corrosion spray
Safety glasses and gloves
Step-by-Step Guide:
1. Safety First:
Ensure the vehicle is turned off and the key is removed from the ignition.
Wear safety glasses and gloves to protect yourself from any potential accidents or battery acid.
2. Locate the Battery:
Open the hood and locate the car battery. In the 2022 Hyundai Sonata, it is typically located in the engine compartment, either on the left or right side.
3. Identify Battery Terminals:
Identify the positive (+) and negative (-) terminals on the battery. The positive terminal is usually marked with a red cover or a "+", while the negative terminal is marked with a black cover or a "-".
4. Disconnect Negative Terminal:
Using a wrench or socket set, loosen and remove the nut on the negative (-) terminal. Once removed, carefully lift the negative cable away from the battery. This helps prevent accidental short circuits.
5. Disconnect Positive Terminal:
Repeat the process for the positive (+) terminal. Loosen and remove the nut, then lift the positive cable away from the battery.
6. Remove the Old Battery:
Use the appropriate tool to remove the battery hold-down clamp. Once the clamp is removed, lift the old battery out of the battery tray. Be cautious, as car batteries can be heavy.
7. Clean the Battery Terminals:
Use a battery terminal cleaner or a wire brush to clean any corrosion or residue from the battery terminals and cable ends.
8. Install the New Battery:
Place the new battery into the battery tray, ensuring it sits securely. Reinstall the battery hold-down clamp to secure the battery in place.
9. Connect Positive Terminal:
Connect the positive cable to the positive (+) terminal on the new battery and tighten the nut securely.
10. Connect Negative Terminal:
Connect the negative cable to the negative (-) terminal on the new battery and tighten the nut securely.
11. Check Connections:
Ensure both battery terminals are securely connected. Wiggle them gently to confirm they are snug.
By following these steps carefully, you should be able to successfully change the battery in your 2022 Hyundai Sonata. If you are unsure or uncomfortable with any step, it's always a good idea to consult your vehicle's owner's manual or seek professional assistance.
--------------------------------------TOOLS I OWN--------------------------------------

Oem strech belt tool : https://amzn.to/3JdT6Cp

30 Degree Push Pin Removal Pliers: https://amzn.to/3BlCx1K

Wheel Stud Installer https://amzn.to/2TQkstm

Stretch Belt Tool https://amzn.to/3e8bYVk

Gear Wrench 1/2 Socket Set https://amzn.to/3e6XDIv

Disposable Gloves https://amzn.to/3e3Bc6Y

Toyota/Lexus Oil Filter Tool https://amzn.to/3k6wuti

Vacuum Brake Fluid Bleeder ​​https://amzn.to/3xzATZB

Gearwrench Ratcheting ​​​​https://amzn.to/2Vm2kHU

7-Piece Spare Tire Retrieval Tool Kit https://amzn.to/2VlKWmE

Oil Filter Wrench Wrench Kit https://amzn.to/3ARUjLi

Oil Filter Pliers ​​https://amzn.to/3yENJpo

Craftsman 1/2 Impact Sockets Set ​​https://amzn.to/3e5z92e

Screw Driver Set ​​https://amzn.to/3hYt5K5

Hand Impact Driver Set https://amzn.to/3yFdF48

Dual Piston Brake Caliper Push Tool https://amzn.to/3yJDe47

Wind Back Brake Caliper Tool Set https://amzn.to/3yKGlsJ
--------------------------------------------------------------------------------------------------------
If this video helped, let us know in the comments, and if you liked this tutorial, leave a like and subscribe fore more content like this! Thanks for watching!
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#howto #diy #Hyundai