How to make buttonhole and attach button using machine.

Sewing a One Step Buttonhole
Insert your chosen button into the back of the buttonhole foot sliding the top of the foot down so the button fits snugly in the gap.

This tells the machine what size the buttonhole needs to be.

Feed the needle thread through the gap in the front of the foot.
Attach the foot to your machine. The button should be towards the back of the machine behind the needle bar.

Gently pull the needle thread and bobbin thread to the left of the machine.

Engage the buttonhole lever by pulling it down as far as it will go.

It should butt up to the left edge of the buttonhole foot.

Select the buttonhole stitch on your machine.

To sew one buttonhole after another you will need to turn the dial to reset then back to the buttonhole stitch
Prepare your fabric ready for sewing. We would usually recommend using interfacing or stabiliser with your fabric to give it extra stability where the buttonholes will be sewn.

Start sewing where you want the lower left hand side of the buttonhole to begin.

Keep your foot down and continue sewing until all four sides of the buttonhole have been completed and you reach the end.

You will need to stop once you reach the end of the buttonhole so be careful not to continue sewing beyond this point!

Remove your fabric from under the foot, cut any loose threads and there you have it - a one step buttonhole.


***************************************************
please subscribe to my channel for future videos and don't forget to press the bell icon that you can get notifications for my all new videos.
***************************************************
Thanks for watching it.