How to change Driver belt on Mitsubishi Mirage
Автор: Chami Motors
Загружено: 2023-07-03
Просмотров: 855
How to change Driver belt on Mitsubishi Mirage#howto #change #driver #belt
Here are five steps to change a drive belt:
1. Locate the drive belt: Identify the position of the drive belt in your vehicle's engine compartment. It connects various components like the alternator, water pump, or power steering pump.
2. Release tension: Locate the belt tensioner, which is usually a pulley that can be adjusted. Use a wrench or a specialized tool to release the tension on the belt. This will make it easier to remove.
3. Remove the old belt: Once the tension is released, carefully slip the old belt off the pulleys, making note of its path and how it's threaded around different components.
4. Install the new belt: Take the new belt and thread it around the pulleys, following the same path as the old belt. Refer to your vehicle's manual or a belt routing diagram if necessary.
5. Apply tension and check: Use the wrench or tensioner tool to apply tension back to the belt until it's snug. Check that the belt is correctly aligned on all the pulleys and is not loose or slipping.
Remember to double-check your vehicle's manual or consult a professional if you're unsure about any steps or specific requirements for your vehicle.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
