Doing an Alignment on my Tesla with Construction Lasers .. lol
Автор: Warped Lab
Загружено: 2021-08-14
Просмотров: 4384
The Ball joint came loose on my Tesla Model S since service appointments are so far away, I had to use construction lasers to bring my car back into alignment, it came out almost perfect as you can see in the video.
I align the lasers with all four hubs on the car completely parallel and then measure the front and rear of each rim to determine the alignment.
believe it or not this is a pretty accurate way to do the alignment if you don't have access to an alignment machine.
you can even do the math to determine the Distance per degree with this formula: C=πd,
in my case I have 21"/533.4mm Wheels. 533.4mm * 3.14 = 1674.8mm (circumference) ÷ 360 (degrees) = 4.65mm per degree. that's it!.
so we now know when measuring each degree is 4.65 mm.
hope this helped you or at least was entertaining.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
![[EN] How to replace the upper arm on a Tesla Model S | Masters of Motion](https://ricktube.ru/thumbnail/6lLx6Wl1_Ts/mqdefault.jpg)
