Configuring CUBE HA on the Cisco Catalyst 8000V Edge Router

Today we are going over the configuration of CUBE High Availability using the Cisco Catalyst 8000V Edge Router. The router was installed on ESXi from this video
   • Installing Cisco Catalyst 8000V Edge Route...  

This configuration allows you to have two routers for failover in case one of them goes down. I also go over my default CUBE configuration.

Here is the relevant configuration for CUBE HA
track 1 interface GigabitEthernet1 line-protocol
track 2 interface GigabitEthernet2 line-protocol

redundancy
 application redundancy
  group 1
  name cubeha
  priority 101
  timers delay 30 reload 60
  control GigabitEthernet3 protocol 1
  data GigabitEthernet3
  track 1 shutdown
  track 2 shutdown

interface GigabitEthernet1
IP address 172.16.10.1 255.255.255.0
 redundancy rii 1
 redundancy group 1 ip 172.16.10.10 exclusive
No shutdown

interface GigabitEthernet2
 redundancy rii 2
 redundancy group 1 ip 192.168.1.105 exclusive

interface GigabitEthernet3
 ip address 10.1.1.1 255.255.255.0
 no shut

voice service voip
redundancy-group 1

Please take a look at the rest of the videos in my channel
   / @collaborationvideos  

If this video was helpful to you please like and subscribe to my channel. If you want to receive updates when I add a new video hit the notifications button.

Also, please take a look at my blog for more UC and Collaboration information
https://ciscouccollab.blogspot.com

#Catalyst8000V #CiscoEdgeRouters #BridgetheWANEdge
Cisco Catalyst 8000 Series
Cisco Catalyst 8000V
Cisco Edge Routers
CSR 1000V
Virtual Router
Bridge the WAN edge
virtual edge platform
Cloud services
Intelligence at the cloud edge
Cisco Catalyst 8000V Edge Software
Cisco IOS XE,Cisco Catalyst
Catalyst 8000V
Coud platforms
Cisco Collaboration
virtual CUBE
CUBE
Cisco Unified Border Element
Cisco
Cisco Systems
sdwan
high availability
CUBE High Availability Configuration
CUBE High Availability
Configuring CUBE HA