Weber 18" Smokey Mountain Gas Mod with 3-2-1 ribs ... so easy

#wsm #smoker #gas #321 #ribs #weber #bbq
Guys a little project that I loved to do!
THIS IS DANGEROUS - SO PLEASE READ THE WARNING PRIOR TO THE VIDEO CAREFULLY!

Items used:

tiny iron drill
Iron step drill like this....
https://www.amazon.de/gp/product/B084...
Gas burner / Paella burner like this
https://tomishop.de/gasbrenner-18cm
Inkbird BBQ Thermometer like this (I like it quit a lot!)
https://www.amazon.de/gp/product/B076...
18" Weber Smokey Mountain Smoker/Cooker
some old steel sheet for the wood chips... you can use a smoker box like this as well...
https://www.amazon.de/Blumtal-Smoker-...

The recipe for the ribs is:
Take nice spare ribs. Take the out of the fridge. Rub them with your preferred rub (I took a modified Guga's rub). Place them on the rack for 3 hours at about 110°C or 220°F. Smoke with wood (I took beach and some weber wood chips). After 3 hours put the ribs in a pan, ad a slight amount of liquid like water, fruit juice or even beer or so. Cover with foil an cook at 170°C or 340°F for 2 hours. Take out of the pan, place the ribs on the rack again and generously brush with prefered bbq sauce from time to time... ready to serve ... with potato chips and coleslaw - AWESOME

0:00 WARNING
0:15 Introduction
1:29 The hack / mod
2:47 Ignition
3:06 use a thermometer !!!
3:35 the cook 3 first hours
4:00 load wood chips easy
4:26 full hack power for phase 2
5:46 last hour cook
5:55 wind
6:15 the result
6:24 rebuilt for charcoal use
6:47 outro