DIY.Epoxy Resin Wall Clock.Dark blue and white.Resin art.

https://www.elegancecrafted.in/
shop now 😄
Welcome to this step-by-step tutorial on creating a stunning dark blue and white resin wall clock. Whether you're a beginner or an experienced crafter, this guide will help you design a unique timepiece that adds a touch of elegance to any room.

Materials Needed:

Clock base (wooden or MDF)
Epoxy resin
Dark blue and white resin pigments
Mixing cups and sticks
Measuring scale
Heat gun or torch
Clock mechanism (hands, motor, and battery)
Protective gloves and mask
Painter's tape
Sandpaper (optional for smoothing)
Plastic sheet or drop cloth (to protect your workspace)
Silicone molds (optional for extra details)
Step 1: Prepare the Clock Base

Choose your clock base and ensure it's clean and smooth. If necessary, sand it lightly to remove any imperfections.
Tape the edges with painter's tape to prevent resin from spilling over.
Step 2: Mix the Resin

Put on your protective gloves and mask.
Measure the required amount of epoxy resin and hardener according to the manufacturer's instructions.
Mix them thoroughly in a cup, ensuring no streaks are visible.
Step 3: Add Pigments

Divide the resin into two parts: one for dark blue and one for white.
Add a few drops of the dark blue pigment to one part and white pigment to the other.
Mix each color well until the pigments are fully incorporated.
Step 4: Pour the Resin

Start by pouring the dark blue resin onto the clock base, covering the areas where you want the darker shade.
Then, pour the white resin, creating a swirl or marbled effect as desired. Use a stick to blend the colors slightly.
Step 5: Remove Air Bubbles

Use a heat gun or torch to gently heat the surface, removing any air bubbles that have formed.
Move the heat source quickly to avoid overheating the resin.
Step 6: Let the Resin Cure

Allow the resin to cure according to the manufacturer's instructions, usually 24-48 hours.
Make sure the clock is in a dust-free environment while it cures.
Step 7: Assemble the Clock Mechanism

Once the resin is fully cured, remove the painter's tape.
Drill a hole in the center of the clock base (if not pre-drilled).
Insert the clock mechanism through the hole and attach the hands according to the instructions.
Step 8: Finishing Touches

Inspect the clock for any rough edges and sand if necessary.
Wipe the clock clean and insert the battery into the clock mechanism.
Conclusion:
Your dark blue and white resin wall clock is now complete! Hang it on your wall and enjoy the artistic touch it brings to your space. Don't forget to share your creation with friends and family!
#trending #viralvideo #satisfying #resin #youtubeshorts #gift #reels #art #pouring