Power ai

G99 CHP plant anti islanding testing for UKPN embedded generation compliance

Cable derating failure - when not all the installation methods are factored in!

Transformer windings basic insulation tests (IR)

Commissioning procedure for a 400VAC switchboard in an industrial application and project.

Commissioning of a DC Distribution Board, with a Capacity of 630 amps, for the 1st Time

Network switching & HV tap change on a cast resin transformer to reduce the secondary voltage

RCD Automatic 8 Test Sequence in Less Than 1 Minute. Quick and Useful Test? We Thought So

Pressure Test of MV Switchboard Busbars Before The First Energisation

First Energisation of a 3.3/0.69kV Cast Resin Transformer

30kV Very Low Frequency Pressure Test of New HV Cables

How to Change the Direction of Rotation of a 3-Phase AC Motor

4kV DC Insulation Test of 1kV Rated Cables - Why Are We Doing That?

Proving Dead on a Steam Turbine Generator HV System - HV Permit for Work

Final Inspection of Transformers HV Cable Connections Before First Energisation

Energisation of 400V Switchboard Incomer from Temporary Generator

Commissioning Emergency Power Backup System Battery Bank

Siemens NX AIR VCB Insertion, Racking in & Closure

Applying MCCB Protection Settings - Siemens ETU550LSI Module

Faulty Siemens MCCB & No Spare Available. Can it be repaired?

Phasing Check at 3.3kV Switchboard for Parallel Transformer Operation

First energisation of 85MVA 33/11kV GT & 11/3.3kV auxiliary transformers on a new CHP plant

First Energisation of a Benning DC Rectifier Panel (Without Batteries) 415VAC to 110VDC

Power Supply Over-Voltage Prevents Commissioning - This Is Why You Must Always Check The Basics !

Clearance for Temporary Supply Energisation, Testing & Report Generation

3-Wire Earth Resistance Tests using the Metrel Eurotest XC Multifunction Tester

Testing Siemens Type 2 Surge Protection Device (Surge Arrester)

3-Phase Supply Rotation Tests (Phase Sequence) Using Metrel & Martindale Testers