How to remove a stuck LH drive axle on an EZ Go golf cart. When the going gets tough...

Just a super short look at how you can get a stuck drive axle out when the bearing does not want to come out and see the world. For some reason I repeatedly call it the seal but it's the bearing that I am referring to that is stuck in the tube. If you have an impact gun you can probably just tighten the nut down on the axle and it should just pull it right out. A ratchet will probably do the same if you hold onto the brake drum. Since I was literally out "in the field", I used what I had at hand. You might actually just be able to use the drum as a ram and pull it out to the end of the axle with the nut at the very end with just the threads screwed down. It all depends on how long it has been in there and if it's rusted in place.
Good luck. If you find this video useful, please hit the like button and subscribe especially if you think I might post something else useful to you, or you just need a laugh now and then. Drop a comment down below if you have something to add. This format can act as a forum for all of us to learn something.
If you would generously like to help me with my retirement, please consider donating to my retirement fund. There’s a {$} sort of symbol up there on the right or a “thanks” button.. Pressing that button activates the Super Thanks and allows folks to donate, or Buy Me a Coffee: https://buymeacoffee.com/teammudshark, or here is a link to my Paypal account where you can send me whatever amount you might want. https://www.paypal.com/ncp/payment/6C.... Any amount will be greatly appreciated. It would be great to be able to actually buy a project that’s not on it’s last legs, or have to rely on whatever I can salvage. Thanks for watching either way.
Have a great day. Keep in mind, if I can do it, you probably can too.