Gear Oil Change - Stark VARG

How to change the Gear Oil on the Stark VARG 🐺⚡️
Official Technical Tutorial.

▶️ Removal Process.
Ensure the bike is not hot.
Remove the skid plate.
Place a suitable container directly beneath the oil drain plug.
Un-tighten the drain plug.
Un-tighten the right motor cover metal cap.
Lean the bike slightly to the right to help drain most of the used oil.
Replace the copper whashers of the drain and lever plugs.
Tighten drain plug to 15 Nm.
Dispose of the used oil following your local regulatory requirements.
Remove oil level bolt.

▶️ Assembly Process.
Ensure the bike is completely level.
Fill in new oil until it starts to come out from the level bolt opening.
Tighten the level bolt to 5 Nm.
Tighten the right motor cover metal cap to 5 Nm.
Clean any oil residue on the motor housing.
Install the skid plate.

#StarkVARG #TechnicalTutorial #EngineeredByRidersForRiders

Timecodes:
0:00 - Intro
0:12 - Removing the skid plate.
0:40 - Draining Oil.
1:33 - Refilling Oil.
2:00 - Re-assembling.
2:25 - Installing skid plate.


Learn more and order your VARG here:
https://starkfuture.com


Observe your local health and safety guidelines. Ensure a safe working environment. Wear appropriate protective gear. Deviating from the prescribed order may result in injury or damage to the products.