How to correctly fit your Zilco driving harness girth and false belly band
Автор: Zilco International
Загружено: 2021-06-17
Просмотров: 2164
The false belly band serves to keep the hold shaft tugs in position. It is threaded through the loops on the girth, and buckled each side to the tail of the shaft loop. It should be tight enough to prevent the shaft loops from moving excessively, but loose enough to allow natural shaft movement.
For vehicles with independent shafts, (i.e. each shaft moves independently from the other) it is common to pass the tail of the shaft loop through the metal square at the bottom of the saddle flap. For vehicles with fixed shafts (both shafts are connected and move as one), it is more usual to leave the shaft loop tail outside of this metal square, so that the shafts can move together without pulling the saddle back and forth. A little more slack is usually desirable with fixed shafts.
Individual shaft designs vary, so it is usually necessary to make primary and secondary adjustments until a satisfactory result is achieved.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
