Step-by-Step Guide: Crafting a Puukko Knife with Hollow Chisel Grind

This is a step-by-step guide for how to make a Puukko Knife with Hollow Chisel Grind. Let us help you design and cut your custom knife blanks using our waterjet: https://waterjetknives.com/

Join Andrew from Trained Monkey Blade Co. in collaboration with Waterjet Knives as this tutorial takes you through the Puukko process, using 80crv2 blade steel.

0:00 - Introduction
1:10 - Grinding Your Blank with a Jig on a Wheel
2:45 - Heat Treat and Maker's Mark
4:15 - Quench in Canola Oil
4:30 - Temper: Done off camera, use a 2-hour cycle at 350 degrees two times in your toaster oven
4:40 - Attach handle scales using temporary gulso bolts, then shaping the handle scales
6:40 - Put the Entire Knife in a Tumbler: An intensive finishing process using 80 grit media for 3 hours.
7:03 - Finished Blade with Cerakote: replace your temporary bolts with permanent ones.

Follow us to stay connected with the Waterjet Knives community for more knife-making tutorials and updates. Like, comment, and subscribe for more videos like this, and don't forget to hit that notification bell to stay updated with our latest releases.

Stay connected on our other platforms:
📷 Instagram: @waterjetknives
🎥 TikTok: @waterjetknives

🔪 Tags: #KnifeMaking #BladeSmith #DIY #HandleScales #Craftsmanship #handmade #knifemakingtutorial #g10 #W2steel #waterjetknives #TrainedMonkeyBladeCo #PuukkoKnife

Safety Reminder: Always prioritize safety when handling sharp objects or operating machinery. Follow all local and national safety regulations when handling tools and knives, and always wear appropriate personal protective equipment when following along with this guide.