Restoration Old Drill Press Part 2

For some years now, we have had a KRENN model SB 32/9 RLM drill press machine standing around in our workshop.
We had to make the decision to either restore it or buy a newer replacement. Since we wanted to start our "German Restoration" channel, the decision to restore was obvious.

This is the second part of the very elaborate restoration of this drill press.

The first part shows you how we disassembled the machine. In the second part we will show you the restoration of the individual parts and the reassembly.

We hope you like our video.

We appreciate any likes and positive comments we receive!

We would also be happy to answer any questions you have in the comments!
_________________________________________________________________________________________________
Time Stamps:

00:00 Intro
00:24 Removing the old paint
00:58 Welding
01:06 Sanding
01:30 Painting
01:49 Removing the old paint
02:08 Filing
02:57 Miling
03:30 Cleaning with Acetone
03:52 Masking with tape
04:38 Painting with Hammerite
04:54 Smearing with Grüneck Power
05:11 Scrapeing off Grüneck power
05:39 Sawing
06:09 Cutting with the angle grinder
06:37 Filling and sanding
07:26 Turning
08:16 Bluing
08:59 Removing the ball bearing
09:18 Sandblasting
11:20 Cleaning parts with Acetone
11:46 Masking with tape
12:06 Painting
12:48 Cleaning with MC 51
13:33 Assembling the engine
14:48 Reassembling the drill press
19:35 Testing the drill
19:57 Before after presentation
21:05 Outro

_________________________________________________________________________________________________
Link to Part 1:
   • Restoration Old Drill Press Part 1  
_________________________________________________________________________________________________
Sozial media

Follow us on Instagram:
  / germanrestoration  

Our Facebook Page:
  / germanrestoration  
_________________________________________________________________________________________________