How to install Unaka Gear 8020 Roof Rack for Ram Promaster

This video goes over how to install the Unaka Gear 8020 roof rack for the Ram Promaster. I was able to fit 10 50W solar panels as well as 2 Maxxair fans on my 136 Promaster through the use of this roof rack. I'm planning on releasing weekly update videos showing the progress on my van build and how I'm building it out. So, consider subscribing to my channel Thrill Time Van Life if you want to see more.

Unaka Gear Roof Racks Link: https://bit.ly/3ZEzsqx

Unaka Gear Instruction Manual Links:
https://unakagearco.com/pages/manuals

Note, in the flush mount solar panel bracket installation manual provided by Unaka Gear it mentions to add anti seize to the bolts before installing the locking nuts. That should help prevent the seizing of the locking nut like I mentioned happened to me in the video. There is some anti seize provided in the kit that Unaka Gear gives when you order the roof rack. The manual also mentions about tightening the bolts with the locking nuts down to 75 in-lbs which I didn't mention in the video.

Tools Needed Links:
1/4" to 3/8" socket adapter: https://amzn.to/424hU97
1/4" Husky Torque Wrench: https://www.homedepot.com/p/Husky-1-4...
3/8" drive hex bit sockets: https://amzn.to/3LyLoGv
t handle ball 3/16" hex driver: https://amzn.to/3mEF4m5
Loctite Blue 242 Threadlocker: https://amzn.to/3ZYotIj
Socket Wrench and socket set: https://amzn.to/3ZH0UnO
Adjustable Wrenches: https://amzn.to/422Gebj

Disclaimer: The links above contain affiliate links and I receive a commission from purchases made using the links.

#diyvanbuild #promasterconversion #vanbuild #roofrack #diyroofrack #promaster136vanbuild #promastervanbuild #vanlife #diyvanconversion