Custom race control bar for foil kite

This is my custom race control system that I created using Flysurfer parts. I use this race control bar with my Flysurfer Sonic 2 kites.
The Flysurfer components (bar, stoppers, quick release, cleat, rings, etc) were purchased from their online shop:
http://shop.flysurfer.com/
And also from the Norwegian distributor:
https://pilotbutikken.no/
The Seldén 420-502 low friction rings were purchased here:
https://www.sailtuv.no/products/selde...
The Clamcleat CL829-11 Aero cleat with CL211 Mk2:
https://www.clamcleat.com/cl829-11.html
Shackles and rings from:
https://www.dutyhook.eu/
Kite lines, SK99 Dyneema, 1.0 mm steering lines and 1.6 mm front lines:
https://www.premiumropes.com/sk99-pow...
Depower line, 5 mm dyneema:
https://www.premiumropes.com/d-power
The trim line is 5 mm sheathed Dyneema,
https://www.roblineropes.com/en/produ...
The leader lines are 3 mm Dyneema:
https://drtuba.eu/product/leader-and-...
An excellent tool for splicing the thin kite lines:
https://drtuba.eu/product/line-splici...
For splicing the bigger lines I used the F-10 D-Splicer:
https://www.premiumropes.com/d-splice...
And I also used a 4 mm splicing needle:
https://www.premiumropes.com/splicing...
Here is a video on how to do the Brummel lock-splice:
   • Brummel lock-splice single braided Dyneema