Flux Core Welding a Sedan Quarter Panel onto a Wagon! | Widebody WRX Wagon Racecar Part 24
Автор: Matt's Motorworks
Загружено: 2024-10-02
Просмотров: 499
Sedan front fenders are a direct bolt on replacement, rear quarter panels not as much. That is not going to prevent me from trying. With ZERO prior body experience, minimal welding experience, and a very old and inexpensive flux core 110v welder. What could go wrong?
Turns out, not the welding surprisingly. Lots of lessons learned here that can be applied to the other side. First and foremost, take the time to weld out all of the holes and seams completely, it makes life easier later. Use a 2K Epoxy Primer on clean bare metal first. And dont use seam sealer on the areas that are going to be welded and body worked... The other side will be a cake walk in comparison. Take your time, pay attention to detail, and have confidence in yourself and you can definitely do this too.
Chapters:
00:00 - Intro
01:32 - Weld Through Primer
02:01 - Seam Sealer Location and Application
09:38 - Welding a Sedan Quarter Panel onto a Wagon
17:02 - Quarter Panel Fully Tacked In
20:26 - Fixing the Sedan Quarter "Bulge"
22:18 - Removing the Seam Sealer...
25:10 - Priming with the Wrong Primer
26:20 - Rocker Panel Welding
27:07 - Finish Priming with the Wrong Primer
27:28 - Next Video
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
