2770009 CNC Dual-Spindle Horizontal 4/5-Axis Machining Center SW BAW06-22 | 2014 Private Treaty Sale

Available exclusively in our HAL Plauen Private Treaty Sale:
CNC Dual-Spindle Horizontal 4/5-Axis Machining Center SW BAW06-22 | 2014

Contact: [email protected]

Listing 2770009 Technical Details:

CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Technology Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: more than 18 kN Wear Limit: 16 kN Speed ​​Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travels: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece clamping / Table system OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carriage (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the swivel carriage Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: less than 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm/s² Partial accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n less than 10,000 min⁻¹: more than 2.75 s Chip-to-chip at n less than 17,500 min⁻¹: more than 3.15 s Operating Data: Spindle hours approx. 22.000; Operating hours approx. 48.000 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)