Winding bobbins and setting in a pricking

How to position the pricking (pattern), adding the first row of pins, where to add the workers and passive pairs, winding bobbins, adding a half hitch, winding a pair of bobbins, setting in a pricking (adding pairs in order to start).

The pricking used is a very simple straight strip with measurements of:
Length: 15cm - 6 inches
Width: 1 cm - 3/8 inch
Pinholes are set at every 0.5cm/1/6 inch down each side (but staggered so the first pinhole on the left is at 0.5cm, the pinhole on the right is at 0.3cm/1/8 inch, then both sides are spaced at 0.5cm/1.6 inch - this makes the zig zag trail)

Using 4 pairs of coloured passives and one worker pair.

Threads used are perle 8 cottons.
Pins used are super fine - 26 x 0.55mm in brass

Links to some suppliers can be found here:

Birch pins link: https://www.birchcreative.com.au/p/pi...
Paper bobbin template can be found here: http://www.brendapaternoster.co.uk/ under paper bobbins in the home page
Facebook Supplier Spotlight page (many international suppliers use this page):   / lacesuppliersspotlight  
Facebook Bobbin lace market (new and second hand supplies) page can be found here:   / bobbinlacemarket  
The UK Lace Guild can be found here: https://www.laceguild.org/
The Australian Lace Guild can be found here: https://australianlaceguild.com.au/
OIDFA (L’Organisation Internationale de la Dentelle au Fuseau et à l’Aiguille) can be found here: https://www.oidfa.com/