Mini Washday - Asko Prowash, Miele W1 & Siemens 4D

Washing 3 smol loads in the Asko, Miele and Siemens. Asko on Quick Pro 40c 59’ which drained at 34min for rinses (it does a full cotton final spin), Siemens on powerSpeed 59’ 40c (which heats to 48, drained at 22min) and Miele on QuickPowerWash 60 49’ (drained at 12min).

The asko uses the same type of programming on quick pro as the mieles QuickPowerWash, it does a long interim after the wash with a short 1st rinse and then drain for final rinse, but it does a cotton final spin unlike the Miele which does a short 30s pulse at 1600 on the 49’ version. The mieles rinsing is the most intensive of them all.

The Siemens removes all interms from this cycle, so it washes for longer but does 3 rinses by default which are all up to the door and quite short, it does a short 6min final spin but this holds at 1400 for 3-4min.

The asko limited to around 1400, so held this for around 4-5min.

For drying I used Beko on the timed 30 prog for thin items, finishing at 31.5c and 2nd load on mix which finished at 33c after 59min.

Sorry some photos are not shown properly, didn’t realise at the time