Boring Head Must Have Accessory | Shop Made Tools

If you own a Boring Head then this is a MUST WATCH video.

This simple attachment for a Boring Head will increase the versatility gf the Boring Head and turn it into a Fly Cutter that can machine a surface twice the diameter of the Boring Head.

This is a FULL BUILD PROJECT that took less than two hours to make and test
#HFCreators
Timestamps:
00:00 Introduction
00:50 Titles
01:00 Machining on the Colchester
01:45 Machining the Tool Shank
02:34 Machining the Tool Head
03:10 Milling a flat on the Shank
03:40 Drilling and tapping a hole for the grub screw
05:10 Boring and Reaming the hole for the Toolbit
08:15 Testing the setup on a piece of mild steel
09:15 First cut
10:50 Second cut
11:30 Conclusions and comments
13:05 End

Referenced videos:
Lathe Roller Tool:
   • Rollers & Balls - A Bump and Burnishing To...  
Fly Cutter Build
   • Making the Most Versatile Fly Cutter | Sho...  

Miniature Indexeable 12mm Cutters:
https://www.mag-pro.com.au/index/inde...
12mm End-mill:
https://www.machineryhouse.com.au/m519
18mm Boring Bar Set for Boring Heads:
https://www.machineryhouse.com.au/m181a