How to change the front wheel bearings and ABS sensors on the RENAULT DUSTER 1 [AUTODOC TUTORIAL]

How to change the front wheel bearings and ABS sensors on the RENAULT DUSTER 1 (HSA) 1.5 SUV 2011–2021 [AUTODOC TUTORIAL]

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC app — https://interstitials.onelink.me/1036...

🛒 Products you'll need for the job:
Wheel bearing for RENAULT DUSTER (HSA): https://www.autodoc.co.uk/car-parts/w...
Abs sensor for RENAULT DUSTER (HSA): https://www.autodoc.co.uk/car-parts/a...
WD-40 Penetrating oil: https://www.autodoc.co.uk/wd-40/13563...
Fast Cleaner LIQUI MOLY: https://www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Electronic Cleaner: https://www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Mounting Paste: https://www.autodoc.co.uk/liqui-moly/...

⚡ All video and PDF tutorials on replacing RENAULT DUSTER (HSA) parts: download and watch at AUTODOC CLUB – https://club.autodoc.co.uk/manuals/re...

00:00 — How to replace the wheel hub bearing and ABS sensor on RENAULT DUSTER 1 step by step
00:59 — Move the rear part of the wheel arch liner aside
01:30 — Remove the ABS sensor
02:10 — Remove the brake disc shield
02:10 — Clean the ball joint mounting on the steering knuckle
04:17 — Press out the wheel hub bearing
05:17 — Press the new bearing into the steering knuckle
06:48 — Install the brake disc shield
07:23 — Install the brake caliper together with the bracket
08:10 — Return the rear part of the wheel arch liner to its place
08:58 — Check the brake fluid level in the reservoir and top it up if needed

Wheel bearings and ABS sensors on RENAULT Megane III Grandtour (KZ) (Year of Construction 11.2008–...) / RENAULT Scénic III (JZ0/1_) (Year of Construction 02.2009–...) / RENAULT Grand Scénic III (JZ) (Year of Construction 02.2009–...) cars should be changed, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.

If you're interested in our content, you can watch our other video tutorials:
►    • How to change a rear engine mount on the R...  
►    • How to change a rear suspension strut on t...  

#autodoc #autoparts #carrepair

Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.

© 2025 AUTODOC SE All rights reserved