Gothic arch greenhouse build | Gluing up the arches | Busy Beaver

Gluing up the arches for the Gothic arch greenhouse
I ripped 2x6x10’ cedar boards into 1/2”x1-1/2x10’ strips. Glued together using tight bond II and clamped them for 24 hrs before taking them out of the clamps. I used 3 stainless steel screws on every spacer. 1”x 1-1/2” x 6” cedar spacers ripped down from 5/4” deck boards spaced every 12”. I put a 16” spacer at the bottom end of the arch for wall support.

DISCLAIMER: My recommendations description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

Amazon affiliate links:
Titebond II: https://amzn.to/401AwrO


Audionautix: Acoustic by Jason Shaw is licensed under a Attribution 3.0 United States License.
Permissions beyond the scope of this license may be available at http://audionautix.com/index.html.

Backwoods by Jason Shaw used for intro

Green leaves by Jason Shaw used for body of film

Busy Beaver merchandise here:

https://BusyBeaver.myspreadshop.com/