Zibo 737 - Autoland X-plane 11 Simulator tutorial [Beginner friendly]

In this video tutorial, I will show you how to perform an Autoland using the Zibo 737 X-plane 11 Simulator.

My goal is to share with you the sequence of the buttons that you need to push in order to set your Zibo 737 X-plane 11 Boeing 737 Auto-Pilot for landing.

I will perform a quick approach cockpit set up so, I will not go in deep through the Approach chart since I made a separate video about that.

If you want to know more about how to read an Approach Chart watch the video below:
   • Jeppesen Approach Plates - [Bried an Appro...  

In order to perform a successful Autoland, you need to engage the second Autopilot after you engage the Approach.

If you follow my steps you will be able to perform an Autoland using the mouse only.

You also must check that the LAND3 or CMD in green is displayed, also, it is very important to check that at least the FLARE is armed in the FMA of your X-plane Boeing 737.

If one of these indications are not shown you must perform a go-around.

The Auto Land is normally performed when the Visibility is low.

Even if you are performing an Autoland you must be ready to take controls and perform a go-around if anything is wrong.

==============================================================
Disclaimer:
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY.
NOT FOR REAL-LIFE OPERATIONS.
PLEASE REFER TO THE OFFICIAL MANUAL AND DOCUMENTATION.
==============================================================