DIY & Build Your Own Seiko Speedtimer For Less Than $50 !

👍In this video, I have made myself a Seiko Speedtimer !
It runs very accurately on a VK63 quartz movement, equipped with a One-Hour Chrono function.

👉Watch Parts were acquired from AliExpress and used in this Video, Links as below :
⌚Link for 20mm Watch Strap
https://a.aliexpress.com/_okEWebP

⌚Link for 39mm Daytona Transparent Acrylic Watch Case
https://a.aliexpress.com/_c379I5J5

⌚Link for VK63 Movement
https://a.aliexpress.com/_c4KuKQOn

⌚Link for 29.5mm Seiko Panda Watch Dial
https://a.aliexpress.com/_c3VycXZh

⌚Link for Chronograph Watch Hands
https://a.aliexpress.com/_c3faVzWF

👀🔥When shopping at AliExpress, it doesn't hurt checking out here and there for better deals yeah.


👉 Timestamp :
00:00 Intro (Show the completed build)
00:52 Channel Banner
00:54 Watch build starts (simple introduction to the watch parts used)
01:59 Pairing the dial to the vk63 movement
02:49 Lining up the time with the turn of the date
03:57 Clamping down the movement to the movement holder
05:00 Installing the Hour watch hand
08:55 Followed by the Minute hand
12:45 Installing the battery
15:42 What a Blunder! How Silly! It is not Dead after all 😊
18:10 And the Seconds watch hand
19:38 Checking Clearance between all the 3 main watch hands
20:50 Installation of the 1st small hand (for the 24 hour indicator)
23:00 And the Minute small counter hand
24:30 Lastly the 3rs small hand for the Seconds hand function
25:00 Checking if any of the watch hands will fall off the watch dial
26:32 Testing if the movement is working properly
27:47 Removal of the watch stem from the movement
28:25 Making sure the watch case if free from dust
29:04 Casing in the VK63 movement into the transparent acrylic watch case
29:40 Inserting the watch stem into the watch
31:58 Lubricating the O-ring (for the Back cover)
32:18 O-ring goes into the groove at the back of the watch
33:26 Cleaning up the back cover, ensuring no dust is inside this transparent back cover
33:41 Locking in the back cover onto the back of watch
35:28 Testing the Chronograph buttons on the watch
36:43 Displaying for comparison purposes between a Speedmaster and a Speedtimer
36:16 Time to put on the Rubber watch straps (for light weight)
39:41 Final Reveal of the completed Seiko Speedtimer
40:44 Setting the watch to the correct time
44:11 Watch finally made it onto my wrist
45:18 Video ends


👉 To watch my video on My Step-by-Step Speedmaster-Inspired Chronograph Build (From Scratch!), please click
   • 💥 My Full Speedmaster-Style Chrono Build: ...  

👉 To watch my Seiko Speedmaster Build video, please click
   • 🤔DIY & Build A Speedmaster? 👈  

👉 To watch my video on Repair and Rebuild a Guess "Speedmaster", please click
   • ⚡ IT WAS A MISTAKE - TO REVIVE THIS GUESS ...  


🔥 Do check out also my other videos : Seiko GMT Mod Build (Part 1 & Part 2)
👉 To watch my Part 1 Seiko GMT Mod Build video (Fixing Dial & Hands), please click
   • Part 1 - Seiko GMT DIY Build (Fixing Dial ...  
👉 To watch my Part 2 Seiko GMT Mod Build video (Casing & Strap Fitting), please click
   • Part 2 - Seiko GMT DIY Build (Casing & Str...  


👍 Music, A big thank you to the following :
For Vlog, Urban and Stylish Electric Piano (1447761)
Early Summer Resort, Jazzy Neo-Soul (1253968)
Daily Life /Streaming, Cute and Stylish Jazz (1486598)
Bright, Gentle, Spring Jazz Piano For A Long Time (978527)


#seikomod #speedtimer #custombuild #watchmodding #speedmaster #seikospeedmaster