WORLD'S LARGEST Foam P-40 Warhawk 2000mm (Sky Flight Hobby) | MAIDEN | (English/Français) 4K 60fps

Hi folks 👋🏻🤠

A huge thanks to you my friends for being subscribed 🙏🏻♥️ you’re now more than 1000 and that means a lot to me !
Salut les gars 👋🏻🤠 un énorme merci à vous mes amis d'être abonnés 🙏🏻♥️ vous êtes maintenant plus de 1000 et ça me touche beaucoup, merci !

Thanks a lot for watching this video, please subscribe to support the channel and never miss a new video 🙏🏻🥰
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour soutenir la chaîne et ne jamais rien manquer 🙏🏻🥰

Follow me on Instagram :   / arthuraerorc  


🎮 Jeti radio ➡️ https://www.opale-paramodels.com/fr/6...
REX7 Assist ➡️ https://www.opale-paramodels.com/fr/r...
Muli6S ➡️ https://www.opale-paramodels.com/fr/c...

🪖🦅 BUY your Sky Flight Hobby P-40E Warhawk 2000mm PNP (green) ➡️ https://www.turbines-rc.com/fr/warbir...





🪖🦅 Sky Flight Hobby P-40E Warhawk 2000mm PNP (green) the WORLD’S largest & most scale Foam P-40 😍

⚠️ Upgrades compared with Lanxiang’s 10 years old P-40:
ESC, motor and servos are upgraded.
Metal landing gear, changed the materials of the landing gear, to make it more tough!

Wingspan 2000mm, Length 1711mm, weight without LiPo 4000gr (with Admiral 5000 50C : 4700gr )
Wing area : 67.25 d㎡
Wing load : 59.47 g/d㎡
Propeller diameter : 18×8in
Thrust : ≥5600g
ESC : Hobbywing 60A
7×Digital metal 17g servo
Brushless motor : 5060 290KV

CG 36mm in front of the trailing edge of « gear’s cover » plane upside down gear up ! BUT it’s easier to measure 115mm from leading edge of the wing just next to the gear : Admiral 5000mAh 50C (705gr) or CNHL 4000mAh 70C (690gr) all the way forward (we don’t have the choice for the LiPo placement…)

My rates Low/Mid/High AFTER MAIDEN:
Ailerons : 80% (25mm) / 90% (28mm) / 100% (31mm)
Elevator : 50% (20mm) / 60% (25mm) / 80% (32mm)
Rudder : 30% (21mm) / 70% (45mm) / 100% (60mm)
Flaps : No flaps for takeoff but 20 degrees (30mm) for windy landing flaps and 45 degrees (65mm) for no wind landing flaps, with 5mm down elevator compensation (10%)
Throttle to right 10mm rudder mix (20%)

⚠️ Add a few clicks of throttle trim before the take-off to keep the plane straight on the runway axis after touchdown !

🚨🛠 Build tips:
Reinforce fuselage junction with carbon rods 4mm diameter because glue isn’t enough (renfort avec 2 joncs carbone 4mm entre les deux parties du fuselage)
I added 4 magnets to be sure the huge cockpit won’t fly away (j’ai ajouté 4 aimants pour sécurisé le cockpit)

Flights with LiPo & timings :
-1st CG 115mm from leading edge, gear up, upside down // Admiral 5000 : 4m38 (4m29 motor) 3.85v
-2nd : CNHL 4000 70C : 4m40 (4m21 motor) : 3.86v
-3rd (around 60-70% throttle) : Admiral 5000 : 5m05 (4m50 motor) : 3.86v

0:00 Intro
0:20 Presentation (CG, Rates which are too low!), upgrades, mixing...!
5:26 Takeoff
5:55 Trimming (almost nothing)
6:08 ‪@PetrincicBrosRC‬ "Gentle Giant at 60% throttle"
6:19 Full flaps test (5mm down elevator)
6:42 Full throttle (scale, not fast) Roll
7:00 Bomb dropping 💣
7:10 Cruising
7:32 CG Test inverted (slightly nose heavy)
7:46 RATES reminder!
8:13 Slow Low Flyby 1/2 throttle
9:10 Almost TOO LOW 😳🙈
9:24 Barrel Roll
9:33 LANDING (not bad for a maiden)
10:00 Taxiing (struts 😍)
10:22 Voltage check : 4m38 flight for 3,84v !
10:53 My final RATES ! Mes DEBATTEMENTS !
11:12 THANKS 🙏🏻🥰
11:37 Photos
11:56 Video : Reinforced fuselage (4mm carbon rods) MERCI YANN 🥰
12:58 Flat carbon parts 5x1mm
13:30 Pilot from Weymuller.fr
13:55 Cleaning all wires
14:38 Added 4 mMagnets to secure the Hatch!
15:36 60A ESC placement (velcro)
16:59 Flaps deflection (half 30mm, full 65mm)



#p40 #warbird #rcplane #lanxiang #avgeek #fighter #flightline #eflite #unboxing #warhawk #assembly #skyflight #ww2 #fms #radiocontrol #flight