Drill Bit Birdcage: A Stunning Metal Art Project

🔴How To Make Birdcage Awl Without Lathe?

🔴What is Birdcage Awl Tool??

A birdcage awl is a woodworking tool used for making starter holes in wood—typically for screws, nails, or drill bits—without splitting the wood. It’s especially useful in fine joinery and cabinetmaking.

🔧 Key Features:
• Tapered, square or four-fluted shaft: The shaft often has a square or diamond cross-section, and sometimes spiraled like a drill bit. This shape allows it to cut rather than just push through the wood.
• Drilling action: Unlike a regular awl, the birdcage awl is twisted as it is pushed, which gives it a boring/drilling action similar to a small drill. It clears out material while creating the hole.
• Pointed tip: Ensures precision when starting a hole exactly where you want it.
• Often has a bulbous handle: This allows for a firm grip and controlled rotation with the palm.

🪚 Common Uses:
• Starting holes for screws or nails without splitting the wood
• Marking precise hole locations
• Pre-drilling in hardwoods where a drill might be overkill
• Used in dovetail joinery and other fine woodworking tasks

🏆 Why It’s Called a “Birdcage” Awl:

The name likely comes from the twisting, cage-like cutting action or the spiral fluting on some models, which resemble the bars of a birdcage.

It’s a traditional but still highly valued tool among woodworkers for its efficiency, control, and simplicity.

🔴I made a beautiful and unique birdcage awl completely by hand – without using a lathe! In this video, I’ll show you the full process from start to finish using only basic tools, lots of creativity, and a bit of patience.

First, I shaped the head of a regular drill bit using my drill press and sandpaper to make it sharp enough for woodworking. Then, I turned my drill press into a lathe and used it to shape a one-of-a-kind wooden handle. I didn’t use any fancy machines — just the drill press and my own DIY turning setup.

To make the handle even more special, I cut some copper sheets by hand and soldered them together using my third-hand tool and the blowtorch I made in a previous videos. The result is a shiny, beautiful copper head that gives the awl a unique touch.

After assembling all the parts, I engraved my logo by hand onto a copper piece and attached it to the bottom of the handle as a final personal touch.

This project combines woodworking, metalworking, wood turning, jewelry making, and hand engraving — all in one tool! If you enjoy handmade tools, DIY builds, or creative crafts, you’re going to love this one.

👉 Don’t forget to like, comment, and subscribe for more handmade tools and creative builds!

Chapters:
00:00 Intro
00:27 Shaping Drillbit
01:43 Turning handle by drill press
09:03 Making lid with diy Tools
15:03 Assembly
15:55 Hand engraving Logo
20:03 Testing


🔴MY DIY TOOLS THAT I USED IN THIS PROJECT:

🔺20in1 vise👉👉👉   • The Secret Weapon of Craftsmen: You Won’t ...  

🔺Rapid lock vise👉👉👉   • Ultimate Fast-Release Vise - Save Time on ...  

🔺Third Hand Tool 👉👉👉   • Watch the Magic: Pole Dancer Engraved Thir...  

🔺Blow torch👉👉👉   • How to make 1300 degrees gas burner/ blow ...  

🔺5in1 scriber👉👉👉   • One Genius Tool, Endless possibilities: Ho...  

🔺Try Square 👉👉👉   • Tiny Tool, Major Results: DIY Mini Wooden ...  

🔺Twisted Awl👉👉👉   • The Most Creative Awl Tool Ever Made – You...  

🔺Turning Tool👉👉👉   • I Made a Turning Tool & Created a Copper C...  

🔺DIY chisel👉👉👉   • Turning Metal into Magic: My Bolt-to-Chise...  

🔺Hand Saw👉👉👉   • This DIY Saw Slices Through Anything Like ...  

🔺Tiny Hand Vise👉👉👉   • Why Does This Tiny Vise Grip Like a Hydrau...  

🔺Magical mallet👉👉👉   • The Most Unbelievable Hammer You’ll Ever S...  


#BirdcageAwl #DIYTool #HandmadeTool #DrillPressLathe #Woodworking #Metalworking #JewelryMaking #HandEngraving #AwlMaking #DIYProject #UniqueTool #NoLathe