How to backwash a pool sand filter | How to backwash pool filter bestway in Hindi

How to backwash a pool sand filter | How to backwash pool filter bestway in Hindi

Turn the filter system off. Then remove the skimmer basket, especially if it’s full of debris.
This is also known as the waste line or backwash port.
Turn your multiport valve to the Backwash position. Then turn the filter system back on.
Water should be flowing out of the backwash port and through the hose.
Let the water run for about 5 minute, or until the water runs clear.
Check the water clarity coming out of the end of your backwash hose or check your filter sight glass.
Turn your filter system off and turn the filter valve from Backwash to Rinse.
This will help remove sand from your lines before the water flows back into your pool.
If you don’t have a Rinse setting, use the Waste setting.
Turn your filter system back on and rinse the filter for about 30 seconds.
Turn the filter system off and turn the multiport valve to the Filter setting.
You can now turn the system back on and run it regularly.
Refill, test, and balance your pool water as necessary. The backwash process removes water from your pool and you’ll need to rebalance your chemicals.

#youtube
#watertreatment
#swimmingpool
#swimmingpoolmaintinace
#india
#pakistan
#Moshskills
#reverseosmosis

YouTube channel Link
   / @technicalskills82842  

Facebook Link 🔗
https://www.facebook.com/mohsin.mosh....