HobbyKing RX3S OrangeRX 3-Axis Flight Stabilizer V2 (V-tail/Delta/AUX) Part 1

Part 1 Review of HobbyKing RX3S OrangeRX 3-Axis Flight Stabilizer V2.
For Part 2    • HobbyKing RX3S OrangeRX 3-Axis Flight Stab...  
This version now has the ability to be switched on/off remotely from your RC transmitter.
It also has two extra configurations for V-tail and Delta Wing(Elevons).
For flaps or flaperons see workaround below:

Work around for Adding Flaps or Flaperons posted by TechKnow in HK discussion:
"The TRUE best answer for using this with 2 aileron servos with mixed in flaps/spoilers is to buy 2 TURNIGY V-Tail Mixer's and add them out of each of the L-ail and R-ail output of the stabilizer and use TURNIGY V-Tail Mixer to mix in separate non mixed raw flap channel from RX with a Y adapter cable each of the Y output cable to each of the other input of the 2 TURNIGY V-Tail Mixers and set servo reversing as needed. Each V-tail mixer is only $3. And useing 2 v-tail mixers is smaller and lighter and cheaper than buying a second stabilizer just to use only its aileron output. Or useing one stabilizer and only stabilize one aileron. With my way you will have both ailerons stabilizing airplane with flaps/spoilers , not just one."

All Needed parts for this flap mod is...
1 RX3S OrangeRX 3-Axis Flight Stabilizer V2 (HK 28456)
2 TURNIGY V-Tail Mixers (HK 6321)
1 servo Y cable.

Flight stabilizer:
http://amzn.to/2itnOi8

Manual for V3 (No V2 Manual yet).
http://www.hobbyking.com/hobbyking/st...

For information on V3 see this video:
   • HobbyKing RX3S OrangeRX 3-Axis Flight Stab...