How to Replace Rear Axle Bearing & Seal 2007 Chevy Silverado Classic

Buy Now!
New Wheel Bearing from 1AAuto.com https://trq.video/ia-TKAXX00076
New Wheel Bearing Set from 1AAuto.com https://trq.video/ia-TKSHS00712

If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too. This video shows you how to install a new TRQ wheel bearing and axle seal on your 2007 Chevy Silverado Classic.

• Check here for more videos on the 2007 Chevy Silverado Classic:    • Chevy Silverado Classic 2007 1st Generation  

This repair was done on a 2007 Chevrolet Silverado 1500 Classic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500 Classic

Tools you will need:
• Pry Bar https://trq.video/oic-1AXAA00020
• 13mm Socket https://trq.video/oDK-1AXAA00015
• 15mm Socket https://trq.video/oDK-1AXAA00015
• 7mm Socket https://trq.video/ozj-1AXAA00017
• Bearing Puller
• Bearing Race and Seal Driver https://www.1aauto.com/*/i/1axaa00038...
• 3/8 Inch Drive Ratchet https://trq.video/oDK-1AXAA00015
• Ratchet https://trq.video/oGz-1AXAA00016
• Torque Wrench https://trq.video/ota-1AXAA00044
• Brake Parts Cleaner
• Gasket Adhesive
• Gear Oil
• Liquid Thread Locker
• Rust Penetrant
• Drain Pan
• Hammer
• Magnet - Extendable
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado Classic 2007 1st Generation:    • Chevy Silverado Classic 2007 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.